Pallet Racks for Fort Oglethorpe, GA Warehouses

Take the 1968-built, 30,000 sq ft manufacturing building on 2nd St, with about 16 ft clear. That height usually allows two pallet levels above the floor position, three if loads are short.

We space beams to your real load heights rather than a standard 60 in. pallet. Trimming a few inches per level is often what adds the extra one.

In a low building, beam profile matters. A shallower beam that still carries your load saves a few inches per level, and those inches add up.

We also check how much lift-off clearance your drivers really need. Many layouts carry more air above loads than the truck requires.

Short loads can be grouped into their own bays so tall loads do not set the spacing for everything.

Hand-loaded cartons, parts and supplies do better on wide-span shelving than on pallet beams. Shelving levels can be set closer together, which suits low ceilings.

A rack-supported or freestanding mezzanine adds a second floor of storage over a work area. In a 20 ft building, that can roughly double usable space for light goods.

A 67,760 sq ft building with I-75 frontage at Exit 353 has 20 ft ceilings. That fits three pallet levels for most loads.

Nearby, the Cloud Springs Road park is planned for about 1.13 million sq ft of Class A space for advanced manufacturing and R&D. Companies outgrowing a low building may move there; our warehouse relocation crews can move the rack and add taller frames.

Send building dimensions, clear height, column spacing and load sizes. We return a CAD drawing with pallet and shelf position counts.

Install crews anchor frames to the floor, level each one, and label beam capacity before handing over the space.

Ceiling height at several points, column locations and your tallest load are the first numbers we ask for. Photos of the roof structure help.

From there we compare pallet rack, shelving and mezzanine options side by side so you can see which gives the most usable space.

If a move to Cloud Springs is on the horizon, we can plan rack that carries over.

How many pallet levels fit at 16 ft clear?

Is a mezzanine worth it in a 20 ft building?

Shelving or pallet rack for small parts?

Can grouping short loads gain a level?

Do you work in older Catoosa County buildings?